That's going to allow for easy and quick connect and disconnect of the recovery strap . Now, this is going to be great for ATVs and UTVs that have an 1-1/4" hitch on it. It is going to require a 1/2" hitch pin and clip or lock to get it secured into the hitch. That item is sold separately. You can find those right here at etrailer.com. A few measurements to go over with you real quick.
I looked at several similar items before purchasing this one. Where the d-ring bolt goes thru, a couple of other brands had thin "ears" welded to the end of the mount. Not being a believer in factory claims of tow ratings, these didn't have the look of strength they claimed. This hitch appears to be milled from a solid piece of steel. If it indeed is 2 pieces welded together, they did an outstanding job in doing so. Unless I need to use a ball-mount hitch, I plan to leave this mounted in the receiver. To that end, I put some Loctite on the bolt before screwing it into the shackle, and then added a small cable tie from the bolt eye to the shackle. Barring a determined shackle thief, it should always be there if I need it. I can't imagine backing into something that would harm this hitch. The only complaint I have is how loose the mount is in the receiver. Several wrappings of duct tape just in front of the hitch pin hole quieted the rattle. A more snug fit would have earned 5 stars.
I honestly didn't have too high of expectations when purchasing this product as the cost was a lot easier on the wallet than local farm supply stores. That being said, this thing has a beautiful fit and finish. The ability to have the shackle mounted sideways, keeps from damaging your rope from pinch points. This thing is a solid chunk of steel. I'm not entirely sure that it is possible to damage this hitch on a full size truck. The hitch pin or shackle will fail way before the receiver will. Make sure you use this thing as it is intended because if you manage to rip this off, it is going to take armor plating to stop this thing in a projectile state. It is SOLID! Also, buy a locking hitch pin. Someone would definitely steal this if they have the chance.

Quadratec’s handy Receiver Hitch D-Ring Shackle Mounts work with any 2"” receiver tube to provide a sturdy recovery point for stuck vehicles. Whether you'’re stuck in sand, snow or mud, you’ll be glad to have such an indispensable tool on board. Our 3/4” D-Rings feature 7/8” diameter screw pins with a 4-3/4 ton working load limit. Shackle design exceeds 5 times it's load limit in our independent testing. Available in hot dip galvanized and three powder coated finishes. Kits come complete with forged steel shackle mount, forged steel D-ring and hitch pin with clip.
Both run all the way through the shank. That's designed so you can use it whether it's in the vertical or horizontal mounting position. You can install it inside your trailer hitch receiver just like this or you can flip it to this position here and still install it inside the same hitch. You can use it in either the horizontal or vertical position.	The shackle is removable. This portion right here is just like a large screw.

The hitch pin is 5/8" in diameter and so has an area of about 0.30 sq-inches. Grade 5 fasteners under 1" have a minimum proof of 85 ksi and grade 8 120 ksi. So a 5/8" grade 5 rod (or bolt with minor diameter of 0.625", so make sure to use a shouldered bolt long enough that the unthreaded part spans both receiver holes) will minimally tolerate about 25,500 lbf and grade 8 about 36,000 lbf without deformation.
Shackle hitches are used together with either a recovery strap, tow strap or snap strap or a winch cable. Its job is to provide a solid connection point so you can rescue a stuck vehicle. That could be one that's bogged down in mud, trapped in a ditch or perhaps stuck on a rock. With a winch and snatch block, (a type of pulley,) you can even do a self-recovery, pulling yourself free.

Not everybody needs to be able to tow this amount of weight. For these people, you might instead opt to get a receiver hitch or ball mount hitch since they will normally clock in around 5,000 or fewer pounds in towing weight capacity. If you don’t envision ever needing a hitch which can handle weights which are more than usual, you should simply get a ball mount of the receiver hitch.

Affordable and efficient strap-and-shackle system attaches to your Rhino-Rack Heavy-Duty crossbar to secure a ladder or other cargo to your roof rack. Cam-action buckle locks the strap in place; a snap-on shackle anchors the strap to your crossbar. Call 800-298-8924 to order Rhino Rack accessories and parts part number RLS5 or order online at etrailer.com. Free expert support on all Rhino Rack products. Guaranteed Lowest Price and Fastest Shipping for Cam-Lock Ladder Strap with Snap Shackle for Rhino-Rack Heavy-Duty Crossbars - 20" Long. Accessories and Parts reviews from real customers.
If you already have a rear hitch receiver installed on your vehicle and simply want the most affordable means possible of installing a hitch onto your truck, this might be the option you are looking for. What is great about this truck hitch is that it can easily install on a hitch receiver and be ready to be used by your vehicle within an hour or so. Since its installation only requires the use of everyday hand tools, you won’t need to grab a power drill or anything which requires significant levels of effort.

Both run all the way through the shank. That's designed so you can use it whether it's in the vertical or horizontal mounting position. You can install it inside your trailer hitch receiver just like this or you can flip it to this position here and still install it inside the same hitch. You can use it in either the horizontal or vertical position. The shackle is removable. This portion right here is just like a large screw.
Use this heavy-duty, hitch-mounted shackle as an attachment point for strap, cable, or rope. Powder coated steel resists rust. Hitch pin and clip sold separately. Features: Tow ring lets you attach recovery strap, cable, or rope (sold separately) to be used in agricultural, industrial or recreational applications Hitch-mounted design ensures quick, simple
We don’t care what great-grandad told you about looping a tow strap over your 2-inch ball for towing situations. It’s incredibly unsafe, and people have literally died trying to do that. When you pull on a tow strap, it stretches – considerably more than you would ever think. This is intentional & by design, but when you are hooked onto an open hook like this you are begging for trouble. By using Vault Cargo Management’s shackle hitch receiver you now have a closed system. This ensures that the tow strap can’t slip off and go anywhere, protecting both yourself & the people around you.
The picture didn’t do it justice. I have not been able to install it yet. I activated the warentee and I spoke to customer service to see if they were helpful. Right away the people I talked to were really down to earth and friendly, knowldgable and berry helpful. This was my first shackle setup. My first impression is that it’s awesome and very solid. Will definitely help me when I go fishing on the beach if I get stuck. Can’t wait to install on my jeep. Like I told customer service, I really wish that the would come up with a locking hitch pin. The company actually told me it’s in the mix. I already recommended this product to 3 of my Jeeper buds. When they come out with that hitch pin, I will definitely buy it. Overall great product. Cool company made in USA. Awesome powder coat finish. I will upload photos when I install the hitch and then the shackle.
×