I spoke to my contact at Lippert Components (LCI) and they informed me that the jack will perform best in cold weather when it is properly lubed and cleaned. To clean the jack I recommend using a brake parts cleaner and spraying down both the drop leg and gears within the head of the unit. Once these two components have been cleaned you will need to acquire some lithium grease like part # L10307 and apply that to the gears on the trailer jack. Once you grease the gears on the unit you...
When going camping in your RV, there are many accessories that you can add to make your experience more enjoyable. These accessories and parts include items as diverse as leveling blocks, chocks, air conditioners, towing items, and even awnings. When considering awnings and other RV parts, it is important to understand the benefits they provide you.
Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs Features: Electric jack with powered drive lets you lift and lower your trailer quickly and easily Low-friction ball screw minimizes resistance to reduce wear, noise and heat Ball bearings roll

According to the information I was able to find, the Ultra-Fab Electric A-Frame Jack you referenced, part # UF38-944016 would be a good choice for the Keystone Outback Toy Hauler you mentioned. The jack has a 3500 lb lift capacity, which is plenty for the listed tongue weight of the toy hauler, plus anything stowed on it. Among the many features of this jack, I like the fact that is uses LED lamps for long life as well as the fact that a 9/16 inch socket wrench can be used in an emergency...


Things like that, that just tend to build up over time when things sit. When it's time to take it off, we'll simply press the button in our toggle, spread the bottom, pull it off and we'll tuck it away until we need it next time to cover up our jack. Not only is this going to work out really good for our Ultra Fab products, but it's also going to work on different Bulldog, Barker, Husky, At Wood 00:01:26, inaudible 00:01:27, Sequent 00:01:27, Component, Odyssey and Ultra Series jacks. That's going to complete our look at the Ultra Fab A-frame jack cover, part number UF38-944020.
A 3500 lbs electric tongue jack would be a good fit for your 6200 lbs 2006 Gulfstream Cavalier travel trailer. Based on your trailer weighing 7000 pounds loaded you will have an approximate tongue weight of 700 pounds. I would recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 lbs. I have also included an FAQ for you too. One item I highly recommend is the Ultra-Fab Protective Cover # UF38-944020. With the electric jack being out in the...
The best jack is extremely relative, and is dependent on many factors. The Etrailer.com Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX will work very well for your 3500 lb dry weight travel trailer and has an excellent price point for this type of jack. It includes a 5-5/8 inch inch drop leg to allow faster extension and retraction and utilizes 2 switches for function; one for power and one for raising or lowering the jack. It also has LED lights to...

The Ultra-Fab Electric A-Frame Jack # UF38-944017 is a great choice for your 2009 Sunnybrook Edgewater Travel Trailer. It has the industry standard mounting of 3 inches on center to mount to your coupler and has an 18 inch lift. The round footplate is a 6 inch diameter for great support and stability. It has a 9/16 inch bolt that will allow you to use a deep well socket to extend of retract if the battery fails. You may also be interested in the Ultra-Fab Protective Cover # UF38-944020...
 EXCELLENT QUALITY 100% Solution Dyed Polyester means Sun-DURA® colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breath-ability for the health of the electric jack components.
Application: for use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting. Product Features: Brand new, waterproof, Super bright Red LED Surface Mount, sealed 15" light Each light has 11 Super Diodes for a Bright Performance. Functions as clearance, side marker or identification light, stop, turn, tail and brake light These light bars have 3 wires for ground, brake, turn and tail light.(White is ground,Black is running lights,Red is turn and brake.) They have 2 screw holes for mounting Comes with a Polycarbonate Lens with All Weather Housing for durability Convert your old incandescent lights to more modern LEDs. Dimensions: 15.5" x 1.25" x 0.5" Hole Center to Center is 14-1/2".
Designed for use with your heavy-duty Bulldog single-speed jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. Lifting has never Features: Makes lifting with your Bulldog jack faster and easier Fits Bulldog single-speed jacks with 12,000-lb static capacity Works great for horse, livestock and heavy-duty trailers Designed
when I ordered this cover for my electric tounge jack i got 2 of them becausse i just knew it was going to be some cheap knock-off from leather and this one would be made of whatever and with the climate changes here in Utah between the very hot and sunny to the freezing snow covered cover wouldnt last the first season, But i could'nt have been more wrong. this is one high quality cover you'll know it the first time you pick it up you can feel the heavy dense matterial. this baby will last a good long time, Maybe i'll go sell the other one for some fishin gear 145623
Even after I read the many bad reviews I decided to give this a try. I wasn't going to just let my tongue jack get rusty and broken. I know alot of you said it leaked and wasn't water resistant so I decided to use my waterproofing spray I use on family shoes on this cover. After a few crazy wind/rain storms it is staying dry. Hubby and I are happy with it.
×