Features: ---Strong Fine Mesh Screen --- Extra Strong Galvanized Steel Roof Flange with Mill Finish --- Vent Color is White --- Includes 70" of 3/4" Butyl Tape ---Includes 28 screws for mounting the roof vent --- No Garnish Ring --- Will replace existing Elixir or Ventline Products --- Standard OEM Dimensions (Opening 13.25" x 13.25") Mounting Flange (16.5" x 16.5") Power Vent Options Available (Visit our store for the listing) * Garnish not included.
A trailer tongue jack is designed to lift the front of the trailer, so you first need to know how much this is. The most accurate way to determining trailer tongue weight is to, well, weigh your trailer. Or you can spitball by figuring out what 15% of your trailer's maximum weight is, as tongue weight should be no more than 15% of the weight of your trailer.
From my research I found that your 16-ft Airstream Bambi has an A-frame. I recommend the Husky Brute Electric Trailer jack, part # HT87247. This jack features a 6-inch drop leg and lift of 18 inches so the total travel is 24 inches. This also includes a manual override if needed. This is a bolt-on installation. To keep the jack protected from the elements over prolonged periods of time I recommend part # UF38-944020.

The former, obviously, and through personal experience, is much harder to use than the latter. However, the primary benefit of the manual jack is that it COULD be less prone to breaking since it is a simpler device. The electric trailer jack could fail electrically or mechanically. The electric trailer jack will also require installation or some know-how as far as wiring goes. 
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system. cargo area on the driver's side and passenger's side. You will have to remove the jack storage cover and some interior paneling to access this harness. Once you've plugged in the connector,
Keep your trailer in line with this system that uses a telescoping bar with friction pads to correct trailer sway. Built-in grease zerks in the head provide simple maintenance. Includes an adjustable maintenance Powder coated steel resists corrosion Snap-up lever eases hookup by reducing lifting required by trailer jack System includes head assembly, adjustable shank, 2-5/16" hitch ball
×