This electric A-frame jack offers 22" of total travel and features an LED courtesy light for simple nighttime operation. Crank included for manual override in case of power failure. Features: Tongue jack positions quickly and easily with integrated drop leg Powered drive provides quiet operation and efficient use of electrical power No more hand cranking Easy-to-access on/off
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED Features: Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily Top-mounted toggle switches are easily accessible Large LED side lights make it simple to set
Designed for use with your heavy-duty Bulldog single-speed jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. Lifting has never Features: Makes lifting with your Bulldog jack faster and easier Fits Bulldog single-speed jacks with 12,000-lb static capacity Works great for horse, livestock and heavy-duty trailers Designed
The sealed, maintenance-free, 12V motor on this electric jack maintains high speeds, even with heavy loads. Extra-large, articulating footplate prevents sinking. Remote control has a 10' long Features: Electric landing gear jack lets you quickly and easily level and stabilize your trailer when used as part of a set Single-speed, 12V DC motor maintains a high speed, even with heavy loads

It sounds like there may be a short in your Bulldog jack which could have been caused by excessive moisture from the rain. Also I recommend checking the wiring from the jack to the ground and power sources. The jack grounds through the mounting hardware so you may need to temporarily remove the jack (be sure to support the trailer another way) and sand away any corrosion. Also check for corrosion or damage to the power wire and where it connects to the battery. The light switch...
From my research I found that your 16-ft Airstream Bambi has an A-frame. I recommend the Husky Brute Electric Trailer jack, part # HT87247. This jack features a 6-inch drop leg and lift of 18 inches so the total travel is 24 inches. This also includes a manual override if needed. This is a bolt-on installation. To keep the jack protected from the elements over prolonged periods of time I recommend part # UF38-944020.
Your satisfaction and shopping experience is our main concern. If you have any problems with your item don't hesitate to get in touch with us. We offer a 30 day return policy on all of our products. A refund less shipping charges will be issued on any product returned new, unused, with all materials, parts, and accessories included within 30 days of the purchase date. All manufactures have a restocking fee of 25% on any returned product that does not have a defect. All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped.  If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges from the manufacturer or supplier for returning your item. Refunds will only be issued to the original credit card that you use when placing your order.
There are literally dozens of manual trailer jacks available. This is a very simple device that doesn't cost a lot of money. There aren't huge differences between the different available options, so we picked a light duty and a heavy duty manual jack option to give you an idea of what is out there. The manual trailer jacks we chose get good reviews on Amazon and are great choices if you wish to go the manual route.
Back up your vehicle to the coupler of your hitch. Center the ball directly under the coupler (duh, right?). Lower your jack down so that the coupler connects with the ball and you raise up the jack up until it can't go up any more.  (Don't raise jack all the way up yet if you have a weight distribution hitch that requires you to lift the hitch as well as the back of the tow vehicle.)
OK, so you have your trailer tongue weight (or a rough idea what it is). What next? If you have a weight distribution hitch that uses spring arms, it's very likely that you will need to raise both the front of the trailer and the rear of your tow vehicle in order to be able to get the spring arms onto their brackets. So not only is the tongue jack lifting the weight of the front of your trailer, it is also picking up the rear of your tow vehicle. 😳
10-1/2" x 13-3/4" Weatherproof cover slips easily over your electric tongue jack and secures with drawstring. Helps to protect jack motor from the elements. Fits most brands and styles Features: Weatherproof cover protects your electric jack from dirt, grime, and inclement weather when not in use Slips over top of jack to cover motor assembly, switch and/or light Drawstring runs
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Powered to temporarily remove all floor coverings and cargo trays. Once you've plugged in the connector, you will have to route the harness through the jack storage compartment to the center of your vehicle. Before
The sealed, maintenance-free, 12V motor on this electric jack maintains high speeds, even with heavy loads. Extra-large, articulating footplate prevents sinking. Remote control has a 10' long Features: Electric landing gear jack lets you quickly and easily level and stabilize your trailer when used as part of a set Single-speed, 12V DC motor maintains a high speed, even with heavy loads

Yes. A 3,000 pound electric jack will work just fine. Based on your trailer weighing 7,500 pounds loaded will equate to your tongue weight between 750-1125 pounds. Although you can choose a 2,500 pound (see link attached) electric jack, I would highly recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 pounds. I think you will really like the price point! I have also included an FAQ for you too.
The Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 12" x 14-1/2" # UF38-944020 is the protective cover I recommend for your Husky Brute 4,500 lb Trailer Jack # HT87247. I've attached a photo of the dimensions when laid flat, but I've also attached a video to assist with the fit. It has a durable vinyl construction with integrated draw string closure.
10-1/2" x 13-3/4" Weatherproof cover slips easily over your electric tongue jack and secures with drawstring. Helps to protect jack motor from the elements. Fits most brands and styles Features: Weatherproof cover protects your electric jack from dirt, grime, and inclement weather when not in use Slips over top of jack to cover motor assembly, switch and/or light Drawstring runs
When going camping in your RV, there are many accessories that you can add to make your experience more enjoyable. These accessories and parts include items as diverse as leveling blocks, chocks, air conditioners, towing items, and even awnings. When considering awnings and other RV parts, it is important to understand the benefits they provide you.
If a trailer didn't have a trailer jack, this means of transport would be pretty much useless – unless you are strong enough to lift it by hands or hitch (unhitch) a tow vehicle somehow else. Jacks can be manual and electric. With the help of an electric jack, you can hitch up substantially easier than with the manual unit, since a manual jack requires the application of physical force. Anyway, whatever the trailer jack you have, this part has to be completely workable and sufficiently reliable to prevent troubles during a journey under various conditions.

Things like that, that just tend to build up over time when things sit. When it's time to take it off, we'll simply press the button in our toggle, spread the bottom, pull it off and we'll tuck it away until we need it next time to cover up our jack. Not only is this going to work out really good for our Ultra Fab products, but it's also going to work on different Bulldog, Barker, Husky, At Wood 00:01:26, inaudible 00:01:27, Sequent 00:01:27, Component, Odyssey and Ultra Series jacks. That's going to complete our look at the Ultra Fab A-frame jack cover, part number UF38-944020.
The Ultra-Fab Electric A-Frame Jack # UF38-944017 is a great choice for your 2009 Sunnybrook Edgewater Travel Trailer. It has the industry standard mounting of 3 inches on center to mount to your coupler and has an 18 inch lift. The round footplate is a 6 inch diameter for great support and stability. It has a 9/16 inch bolt that will allow you to use a deep well socket to extend of retract if the battery fails. You may also be interested in the Ultra-Fab Protective Cover # UF38-944020...
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it on the delivery date. If your item(s) do arrived damaged, please send photos to sales@rvcoversupply.com and we will process an insurance claim on your behalf. When installing your cover Please be sure the unit is clean and sharp objects are covered accordingly when to prevent any damage. A dirty, ripped, scratched or torn cover cannot be returned for a refund. Manufacturers warranty information can be found by clicking the "Featured Manufacturers" tab at the top of our homepage. A warranty may be void if the product has been damaged by accident, misuse, abuse, or other abuses not arising out of defects in material or workmanship and does not cover everyday wear and tear.
Yes! The Stromberg Carlson Electric Trailer Jack # JET-3755 is compatible with the Lippert # LC429756 that you referenced and it does measure the 8-1/2" when retracted. You could potentially use a caster wheel like part # PS1400750340 but this would cut your tongue weight from 3,500 lbs down to 1,200 lbs. All of our caster and wheel sets have a much lower weight rating so to retain the 3,500 lb tongue weight rating you will need to keep the foot pad. I recommend using the Ultra-Fab...

If you've got a larger tongue jack, we've got you covered. (Literally) This cover is a slightly bigger version of our best-selling standard cover, and it's perfect for covering larger tongue jacks. Just like our original it protects your electric tongue jack with heavy-duty vinyl. It's perfect for daily use or long term storage. It is simple, effective, and critical for proper jack storage and protection. Measures 14.5 in. wide X 17.5 in. tall, works with most manufacturers' electric tongue jacks.

Application: for use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting. Product Features: 100% Brand New COMPLETELY SEALED AND WATERPROOF Super bright Red LED Surface Mount, Sealed 17" light Each light has 23 Super Bright Diodes for a Bright Performance. Functions as clearance, side marker or identification light, stop, turn, tail and brake light These light bars have 3 wires for ground, brake, turn and tail light. They have 2 screw holes for mounting Comes with a Polycarbonate Lens with All Weather Housing for durability Convert your old incandescent lights to more modern LEDs. POLYCARBONATE LENS IS SONIC WELDED TO THE HOUSING Voltage:12V Size: 44 x 2.6 x 2.2cm (17 x 1 x 0.88 Inch).
The Fastway Flip trailer jack foot is an easily installed foot that will give you either a 4" or a 6" extension. It has a unique feature in that it will automatically drop down when you are lowering your jack and it will automatically retract into a stowed position as you are running your jack up. Either extension length fits the standard 2 1/4" tongue jack with a 2" inner tube diameter.

Features: ---Strong Fine Mesh Screen ---12 Volt Fan with 6" Blades --- Extra Strong Galvanized Steel Roof Flange with Mill Finish --- Dimensions 8.5" Round x 1.5" Deep --- Vent Color is White ---Includes 70" of 3/4" Butyl Tape ---Includes 28 screws for mounting the roof vent --- No Garnish Ring --- Will replace existing Elixir or Ventline Products (Please check the Hinge Style before Ordering) --- Standard OEM Dimensions (Opening 13.25" x 13.25") Mounting Flange (16.5" x 16.5").
The cover has worked great. The reason for only 4 stars is that we took preventative measures when it arrived. Many reviews complained about it leaking. We turned it inside out and sealed all the seams. Once dry, we put a plastic bag on first and then this cover. Using both has made a water/weather proof cover to protect the electronics of our power lift. The plastic on its own is not strong enough, adding this cover made the difference.
×