I purchased this cover for my BD500199 electric tongue jack. It fits great, looks good, and stays in place while driving... one bit of advice though: my level blistered, or shattered, I'm assuming from heat. the cover basically rests right on top of the level. I contacted etrailer and they sent me a new level. I have a foam insulator between the level and the cover now. 541015
I went out to the warehouse to look at the Lippert Electric A-Frame Tongue Jack, # LC285318. In order to remove the screws that secure the cover you will need a long and thin phillips head screwdriver. If you don't already have one, you'll want to purchase a Protective Cover, # UF38-944020, to keep your jack dry when you are at the campsite. This will protect the head of the jack and keep the motor protected from the elements.
Features: ---Strong Fine Mesh Screen --- Extra Strong Galvanized Steel Roof Flange with Mill Finish --- Vent Color is White --- Includes 70" of 3/4" Butyl Tape ---Includes 28 screws for mounting the roof vent --- No Garnish Ring --- Will replace existing Elixir or Ventline Products --- Standard OEM Dimensions (Opening 13.25" x 13.25") Mounting Flange (16.5" x 16.5") Power Vent Options Available (Visit our store for the listing) * Garnish not included.
In case of emergencies such as school closings, bus delays or upcoming events, the district will use its computerized telephone notification system to inform parents. It is extremely important that parents verify their emergency telephone numbers with each building secretary. If you have changed telephone numbers or are now using only a cell phone contact to be reached please update your information with the building secretary.
Yes! The Stromberg Carlson Electric Trailer Jack # JET-3755 is compatible with the Lippert # LC429756 that you referenced and it does measure the 8-1/2" when retracted. You could potentially use a caster wheel like part # PS1400750340 but this would cut your tongue weight from 3,500 lbs down to 1,200 lbs. All of our caster and wheel sets have a much lower weight rating so to retain the 3,500 lb tongue weight rating you will need to keep the foot pad. I recommend using the Ultra-Fab...
As soon as you place your order, you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.
This custom-fit mount lets you secure your Hi-Lift jack to the driver's side of your Jeep. The jack mount lock codes to your ignition key. Automotive-grade, weather-resistant black powder coated of keys - for your hitch lock and coupler lock, your pickup cover or trailer door, and all the various padlocks securing your equipment? Tired of fumbling for the right key or having to replace a lost key?
A trailer tongue jack is designed to lift the front of the trailer, so you first need to know how much this is. The most accurate way to determining trailer tongue weight is to, well, weigh your trailer. Or you can spitball by figuring out what 15% of your trailer's maximum weight is, as tongue weight should be no more than 15% of the weight of your trailer.

This is a Tandem Axle Steel Diamond Plate Trailer Fender. This Dual Axle Fender is made of 14 Gauge Steel. This Fender measures 10 inches wide x 72 inches long x 13 inches tall. If you're looking for a Heavy Duty Steel Fender for your tandem axle trailer this is the one for you. Most commonly this style of fender is welded to the trailers frame at several points, or to brackets that are welded to the trailers frame. Both sides of this fender are able to be used as a welding surface.
10-1/2" x 13-3/4" Weatherproof cover slips easily over your electric tongue jack and secures with drawstring. Helps to protect jack motor from the elements. Fits most brands and styles of electric A-frame jacks. Call 800-298-8924 to order Ultra-Fab Products accessories and parts part number UF38-944020 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 10-1/2" x 13-3/4". Accessories and Parts reviews from real customers.

Those who are interested in buying items like these have many different types available for their needs. For example, a trailer fender is necessary for protecting your RV from impact damage. They can fit where old ones were and fix any auto body concerns from which your vehicle suffered. More specific types include RV awnings that provide you with a comfortable place to sit during rainy weather.


I can help you find a cover for your Fulton F2 Hand Winch # FW32000101. I was able to go out to our warehouse and try the Ultra-Fab Cover # UF38-944020 on the Fulton winch # FW32000101. This bag measures 12 by 14-1/2 inches. I have linked a few pictures to see how it fit. The bag was able to stretch over the housing unit but not the handle when attached. We also have a 14-1/2 by 15-1/2 vinyl bag # UF38-944026, that will give you slightly looser fit than the one pictured. Since...

The former, obviously, and through personal experience, is much harder to use than the latter. However, the primary benefit of the manual jack is that it COULD be less prone to breaking since it is a simpler device. The electric trailer jack could fail electrically or mechanically. The electric trailer jack will also require installation or some know-how as far as wiring goes. 


I can help you find a cover for your Fulton F2 Hand Winch # FW32000101. I was able to go out to our warehouse and try the Ultra-Fab Cover # UF38-944020 on the Fulton winch # FW32000101. This bag measures 12 by 14-1/2 inches. I have linked a few pictures to see how it fit. The bag was able to stretch over the housing unit but not the handle when attached. We also have a 14-1/2 by 15-1/2 vinyl bag # UF38-944026, that will give you slightly looser fit than the one pictured. Since...
EXCELLENT QUALITY 100% Solution Dyed Polyester means Sun-DURA® colors are part of the polyester fiber itself, rather than the dye adhering only to the surface of the fibers. 7oz. marine grade polyester that offers superior resistance to harmful UV rays, fading, mildew, tearing and overall wear-and-tear. Our own unique finish provides exceptional water repellency while maintaining breath-ability for the health of the electric jack components. Made in USA 
After what seemed like a hundred cranks, your trailer is lifted enough to attach the hitch to your truck, but your arm feels ready to fall off. An electric trailer jack can save your arm by lifting your trailer hitch with just the touch of a button. Most electric jacks use 12V power, so you can hook them up to a battery while you are out on the go and not worry about finding an outlet. Most models also include a manual jack handle as well so you can still lift the trailer, even if your battery runs out of power. The Barker electric trailer jack is a commonly found option, and the VIP 3500 can handle most campers and travel trailers, as it is rated to lift up to 3,500 lbs. This model lifts trailers up to 18 inches, so you can easily attach your trailer to your truck or SUV. There are many electric trailer jack options available with many lift capabilities, and with the large inventory available on eBay, you can lift your trailer with the touch of a button in no time.
The Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 12" x 14-1/2" # UF38-944020 is the protective cover I recommend for your Husky Brute 4,500 lb Trailer Jack # HT87247. I've attached a photo of the dimensions when laid flat, but I've also attached a video to assist with the fit. It has a durable vinyl construction with integrated draw string closure.
Law enforcement agencies generally support the Taser as a worthy tool that protects officers from violent offenders and protects the suspects as well. According to Taser International, founded in 1993, which markets products based on Mr. Cover’s original invention, more than 13,400 law enforcement agencies around the world now use Tasers. More than 375,000 individual officers have them, and so do more than 181,000 private citizens.

Jack Cover, (John Higson Cover, Jr.), American physicist and inventor (born April 6, 1920, New York, N.Y.—died Feb. 7, 2009, Mission Viejo, Calif.), spent most of his career in aerospace but became famous in the mid-1970s for inventing the TASER, a handheld weapon that fires darts attached to insulated wires to deliver debilitating electric shocks at ranges of up to several metres. Cover’s goal was to devise a nonlethal means of stopping violent acts, such as riots and hijackings. Though the TASER was initially classified as a firearm because the darts were propelled by gunpowder, in 1993 Cover used compressed nitrogen to activate the darts; the modification allowed the public to purchase his invention. The TASER name (a registered trademark) was a modified acronym from the title of one of Cover’s favourite childhood books: Tom Swift and His Electric Rifle.

The proliferation of Tasers has made them controversial, as their frequent use has led to fears of their overuse. According to Amnesty International, which seeks to have the use of Tasers by private citizens prohibited and use by the police curtailed pending further study, at least 334 people have died since 2001 after being shot with Tasers by police officers.


The Camco Electric Tongue Jack Cover helps protect your electric tongue jack when it is not in use and in storage. The durable 3-layer spunbond polypropylene provides protection from harmful UV rays, excess moisture and dirt and debris. Tongue Jack Cover accommodates most styles and brands of Electric Tongue Jacks, and measures 18" tall x 7.5" wide x 8.5" deep.
×